Peristaltic Dosing Pumps
Etatron offers a comprehensive range of peristaltic dosing pumps to cover, basic dosing and speciality pumps for conductivity, biocides and pool control.
Basic Peristaltic Pumps
Basic quantitative dosing pumps, potentiometer controlled flow, F series designed for panel mounting (NB: not designed for continuos duty)
Speciality Versions
B-FCD, pumps with built in EC controller & EC elcdtrode for use in crate wash, dish washers etc; BIOCLEAN CONTROL B, units with built in timer mecahnism for dosing of grease traps; ePool, controller based pumps for automated pools management monitoring and control of pH and chlorine [using ORP]

Series B3-V Peristaltic Dosing Pumps
B3-V is a flow adjustment peristaltic dosing pump from 10 to 100%.
- Maximum Flow Rate: up to 12 l/h (Adjustable Flow)
- Maximum Pressure: up to 3 bar
- Power Supply Range: 90÷260Vac 50/60Hz
- Hose: Santoprene®
- Connections: 4x6 mm
- Installation Kit: Included

Series B-FCD Peristaltic Dosing Pumps
B-FCD is a peristaltic dosing pump with inbuilt Conductivity controller. The standard pump has Santoprene® hose, upon request Silicon tube.
- Maximum Flow Rate: up to 10 l/h
- Maximum Pressure: up to 3 bar
- Conductivity range: 500 ÷ 20.000 μS
- Power Supply Range: 230÷240V 50/60Hz
- Hose: Santoprene®
- Connections: 4x6 mm
- Installation Kit: Included
- Conductivity probe: Included

Series BH3-V Peristaltic Dosing Pumps
The BH3-V is a 100 l/h peristaltic dosing pump with an adjustable flow rate from 10 to 100% and maximum pressure of 1.5 bar.
- Maximum Flow Rate: 100 l/h (Adjustable Flow)
- Maximum Pressure: 1.5 bar
- Power Supply Range: 90÷260Vac 50/60Hz
- Hose: Norprene® (*)
- Connections: 10x14 mm
- Accessories: Not included
- Suction and delivery tubes: Included
(*) Upon request: different configurations.

Series BIOCLEAN CONTROL/B Peristaltic Dosing Pumps
BIOCLEAN CONTROL/B is a peristaltic dosing pump with incorporated electronic timer. Day or week programmers, 8 cycles with 1 minute minimum activation time.
- Maximum Flow Rate: up to 12 l/h
- Maximum Pressure: up to 3 bar
- Power Supply Range: 230Vac 50/60Hz
- Hose: Santoprene® (*)
- Connections: 4x6 mm
- Installation Kit: Included (*)
(*) Upon request: different configurations.

Series ePool Peristaltic Dosing Pumps
A unique technology associating all dosing functions. Installed directly in the water supply line, the Dosatron operates by using the flow of water as the power source.
- Flow Rate: Up to 3 L/H
- Maximum Pressure: 3 Bar
- Power Supply: 90-260v standard
- Tubing: Available in Santoprene®
- Control: Integral pH or Redox controller for proportional dosing
- Level Control: Supplied with level probe, alarm output relay
- Measurement ranges: pH: 5 – 9 pH
- Redox: -300 - +900 mV
- Alarms: Low level; Overdosing

Series F Peristaltic Dosing Pumps
Peristaltic dosing pump F series has a constant flow rate, available with Santoprene® and Silicone tubing.
- Maximum Flow Rate: up to 6 l/h (fixed Flow)
- Maximum Pressure: up to 1bar
- Power Supply Range: 230V 50/60Hz (*)
- Hose: Santoprene® or Silicone
- Fittings: PP
- Installation Kit: not included (*)
(*) Upon request: different configurations.